Peugeot 308: Drive Assist Plus

Only available on versions with automatic gearbox and drive selector.

This system automatically adjusts the speed and corrects the trajectory of the vehicle, using Adaptive cruise control with Stop&Go function in conjunction with Lane positioning assist.

These two functions must be activated and in operation.

For more information on Adaptive cruise control and Lane positioning assist, refer to the corresponding sections.

The system assists the driver by acting on the steering, acceleration and braking within the physical limits and capacities of the vehicle. Certain road infrastructure elements or vehicles in the surroundings may not be properly seen or may be poorly interpreted by the camera and radar, resulting in an unexpected change in direction, a lack of steering correction and/or inappropriate management of acceleration or braking.

Primarily designed for driving on main roads and motorways, this system only works with moving vehicles driving in the same direction as your vehicle.

Selecting/Deselecting the system

► Press this button successively until the Drive Assist Plus mode is displayed on the instrument panel.

► After a few seconds, the Drive Assist Plus mode is selected. The Driving aids mini-view is displayed on the instrument panel.

The colour of the symbols, representing the steering wheel and the side lines, depends on the operating state of the system:

(grey)

One or more operating conditions is not met; the system is paused.

(green)

All operating conditions are met; the system is active.

(orange)

System malfunction.

► Press this button successively again until the OFF mode is displayed on the instrument panel.

► After a few seconds, the Drive Assist Plus mode is deselected. The Driving aids mini-view disappears.

Cruise controlDrive Assist 2.0