Peugeot 308: Temperature pre-conditioning (Rechargeable hybrid or Electric)

This function allows you to programme the temperature in the passenger compartment to reach a pre-defined, non-modifiable temperature (approx. 21ºC) before you enter the vehicle, on the days and at the times of your choice.

This function is available when the vehicle is connected or not connected.

Programming

In the Climate touch screen application, select the Preconditioning tab.

► Press + to add a programme.

► Select the time of entry into the vehicle and the desired days. Press OK.

► Press ON to activate this programming.

The pre-conditioning sequence begins approximately 45 minutes before the programmed time when the vehicle is connected (20 minutes when it is not connected) and is maintained for 10 minutes after.

For rechargeable hybrid vehicles, this indicator lamp comes on fixed when a temperature preconditioning cycle is programmed. It flashes when temperature pre-conditioning is in progress.

You can set multiple programmes.

To optimise the driving range, we recommend starting a programme while the vehicle is connected.

The programming can also be carried out from a smartphone via the MYPEUGEOT APP application.

For more information on Remotely operable additional functions, refer to the corresponding section.

The fan noise that occurs during temperature pre-conditioning is perfectly normal.

Vehicles equipped with an alarm system

Depending on version, interior volumetric and anti-tilt monitoring may be reduced or even suspended during temperature preconditioning sequences.

Operating conditions

- The function is only activated when the ignition is switched off and the vehicle locked.

- When the vehicle is not connected, the function is only activated if the battery charge level is greater than 20% (Rechargeable hybrid) or 30% (Electric).

- When the vehicle is not connected and a recurring programme is active (e.g. from Monday to Friday), if two temperature pre-conditioning sequences are run without the vehicle being used, the programme will be deactivated.

Rear screen demisting/ defrostingFront fittings