Peugeot 308: Roof bars
As a safety measure and to avoid damaging the roof, it is essential to use transverse roof bars approved for your vehicle.
Observe the instructions on fitting and use contained in the guide supplied with the roof bars.
Maximum load distributed over the transverse roof bars, for a loading height not exceeding 40 cm (except bicycle carrier): 80 kg.
As this value may change, please verify the maximum load quoted in the guide supplied with the roof bars.
If the height exceeds 40 cm, adapt the speed of the vehicle to the profile of the road to avoid damaging the roof bars and the fixings on the vehicle.
Be sure to refer to national legislation in order to comply with the regulations for transporting objects that are longer than the vehicle.
Direct fitting on roof
The transverse bars must only be fixed at the four anchorage points located on the roof frame.
These points are concealed by the vehicle doors when the doors are closed.
The roof bar fixings have a stud which must be inserted into the opening of each anchorage point.
Fitting on longitudinal bars (SW)
The transverse bars must be fixed at the markings located on the longitudinal bars.
Recommendations
Distribute the load uniformly, taking care to avoid overloading one of the sides.
Arrange the heaviest part of the load as close as possible to the roof.
Secure the load firmly.
Drive gently: the vehicle will be more susceptible to the effects of side winds and its stability may be affected.
Regularly check the security and tight fastening of the roof bars, at least before each trip.
Sunroof
Do not operate the sunroof when using roof bars - risk of major damage!
Peugeot 308 2021-2024 (P5) Owners Manual
Actual pages
Beginning midst our that fourth appear above of over, set our won’t beast god god dominion our winged fruit image
